액체크로마토그래피,고성능액체크로마토그래피,HPLC600,코닉,싸이닉스인스트루먼트

액체크로마토그래피,고성능액체크로마토그래피,HPLC600,코닉,싸이닉스인스트루먼트


매물번호[201252]

• 기본사양 : 코닉 고성능 액체 크로마토그래피(HPLC 600)
• 가격 : 협의(절충가)(할부가)
• 매물분류 : 식품/화학/제약기계 > 제약기계
• 상세분류 : 크로마토그래피
• 매물상태 : 신제품
• 제조사 : 코닉[KONIK GROUP]

K600 HPLC

High Performance Liquid Chromatography

일체형 액체 크로마토그래피 시스템

• Isocratic, HPG, LPG

• Column Switching Device

• Manual or Automatic Injection Systems

• Optional Column Thermostat

• For Reversed-Phase (C8, C18),

• Middle-Polar (NH2, CN)

• Normal-Phase (Si)

• Ion Chromatography

• Biochromatography (PEEK)

• GPC / SEC

One mainframe that includes:

- Degasser

- Choose of 4,6,8 solvents

- 4 Gradient low pressure mixing

- Integrated dual piston pump

- Integrated Oven with injector and column switching

- Integrated variable UV-VIS

- TCP/IP remote control

- Build in 2 ADC 24 bit 500Hz

KONIK HPLC , K560 K600 COLUMN OVEN

• Heating and cooling capability

• Temperature range 5 - 85 °C

• Temperature accuracy +/- 0.2 °C

• Temperature stability +/- 0.1 °C

• Integrated leak detection

• Up to 5 analytical columns

• 5 ramps with 6 isothermal steps

• Build in automatic injection valve

• Build in Column switching option

• Optimized for the K2 Interface

KONIK HPLC SYSTEM CONTROLLER

• Remote control TCP/IP

• Vaccuum degasser monitoring

• Pump control

• UV-VIS Control

• Gradient Control

• Oven Control

• 2 Channel ADC 24 bit 500Hz

KONIK K600 HPLC ISOCRATIC PUMP

• Flow Rate Accuracy ± 2%

• Pressure Rate Accuracy ± 2 %

KONIK K600 HPLC GRADIENT PUMP

• Flow Rate Accuracy ± 2%

• Pressure Rate Accuracy ± 2 %

• Maximum flow in gradient mode 3mL/min

• HPLC Pump for analytical and semi-preparative chromatography

• Ternary LPG

• 10 ml and 50 ml pump heads with stainless steel, PEEK

• Piston back flushing system included

• Flow range 0.01-10mL/min

• Maximum operation pressure 40MPa

• Maximum number of gradient sections 50

• Setting of concentrations of components solvents A+B+C mixing gradient and

Solvents D+E+F mixing is automatically change with cleaning procedures.

• Duration of a single gradient section 1s to 999 min 59s

• Maximum number of stored files (programs) 100

KONIK HPLC 560, 600 UV-VIS DETECTOR

• UV Spectrophotometer for routine analysis with deuterium lamp, wavelength range 190 – 600 nm

• Optional Tungsten halogen lamp extends working range up to 800 nm (560 E UV-VIS DETECTOR)

• Flow cells for analytical and preparative chromatography, stainless steel, PEEK, PTFE, fused silica and vespel

• Friendly handling, the optical bench can be pulled out through front, easy lamp exchange

• Spectral half-width: 6nm

• Data acquisition with 3 changes of wavelength during analysis

• Wavelength accuracy : ± 1.0 nm

• Wavelength reproducibility : ± 0.5 nm

• Noise level at empty cell: (240 nm,TC 1s): ± 0.5 *10^-5AU

• Drift at empty cell: (240nm after 1 h): 1.0 *10-4AU

• Flow cells for standard analytical (HPLC), micro (MLCC) and preparative chromatography (PLCC)

KONIK HPLC 600 & 560 MW DETECTOR
and 600 & 560 PDA DETECTOR

• One lamp module with Deuterium Lamp (200-600 nm)

• Multi-wavelength detector based on PDA technology

• Data acquisition with 4 independent wavelengths per run

• Typical spectral half-width: 6nm

• Accuracy of adjustment: ±1.0 nm

• Wavelenght reproducibility: ±0.5 nm

• Light source: deuterium discharge lamp

• Materials in contact with mobile phase: PTFE, fused silica, stainless steel

KONIK HPLC PDA 600 DETECTOR

• Noise level at test cell (254 nm, TC 0.75s): ±0.5*10-5 AU

• Drift at test level cell (254 nm after 1h): 1*10-5 AU/hr

• Time constant: 0.5s; 0.75s; 1s or 2s

• Output for integrator: 1V/AU

KONIK HPLC 600 & 560 Refractive index (RI) DETECTORS

• KONIK RI 560 detector can be used in analytical applications for flow rates up to 5mL/min.

• KONIK RI 560 detector can be used for semi-preparative use for flow rates up to 100mL/min.

• Light source: LED

• Wavelength 950nm ±30nm

• Wavelength accuracy ≤1nm (254 nm)

• Time constants 0.1/0.2/0.5/1.0/2.0/5.0/10.0s

• Display LCD 2 lines, 24 characters each

KONIK HPLC 600 & 560 Fluorescence(FLD) DETECTORS

• KONIK FL 560 detector covers a wide wavelength range: from 220 to 700nm (for excitation and emission)

• ~ 900 nm with an optional PMT

• Versatile time-programming capabilities are provided for wavelength, response, gain, spectral scan, etc., permitting highly selective detection of various compounds

• A rapid scan feature allows on-the-flow spectral acquisition for both emission and excitation spectra without interrupting the chromatographic elution.

KONIK NEW Designed HPLC-MS

• Positive and negative ionisation modes as standard, Electrospray Ionisation and Atmospheric Pressure Chemical Ionisation as standard allows the analysis of the widest type of compounds.

• The interface is based in a patent pending adjustable geometry spray orientation (from othogonal to on-axis) and keeps the capillary and ion optics cleaner. Optimum electrospray droplet formation and desolvation thanks to the x-y-axis capillary fi ne adjustment.

• The exchange between GC/MS and LC/MS is accomplished in less than 15 minutes and the switch between ESI and APCI

• probes in less than 5 minutes without breaking the vacuum.

• The interface includes full control of nebuliser gas, counter flow heated drying gas, sheath gas, heaters, cone voltages, needle voltage, etc. Ions are transferred to the quadrupole through an Hexapole based ion guide that ensures high mass transmission with improved sensitivity.

• Operational fl ow rates comes from 2 μl/min to 2.0 ml/min in ESI mode and from 0.2 to 2 ml/min in APCI mode. Low pictogram level samples can be easily analysed.

• Collision Induced Dissociation (CID) and multicharged ion analysis expands the mass range to thousands of amu, allowing the easy analysis of high molecular weight compounds and structure elucidation.

KONIK ROBOKROM^® in HPLC Mode

• High Performance Module, easy operating, with all basic functions plus:

• partial loopfil and

• derivatization capabilities

• 105 x 1.8 ml plus 6 x 10 ml vials for additional liquids, optional trays

for 171 x 0.8ml and 32 x 6, 10 or 20 ml vials

• Injection volume 0.1 – 500 µl

• Optional TTC: sample tray cooling and heating (5 – 70ºC)

액체크로마토그래피,고성능액체크로마토그래피,HPLC600,코닉,싸이닉스인스트루먼트